H3C Technologies H3C S7500E Series Switches - Manual (Page 53)

2-11
z
RFC 5036: LDP Specification
MPLS Configuration Task List
Complete the following tasks to configure MPLS:
Task Remarks
Enabling the MPLS Function Required
Configuring a Static LSP Required
Configuring MPLS LDP Capability Required
Configuring Local LDP Session
Parameters
Optional
Configuring Remote LDP Session
Parameters
Optional
Configuring PHP Optional
Configuring the Policy for Triggering
LSP Establishment
Optional
Configuring the Label Distribution
Control Mode
Optional
Configuring LDP Loop Detection Optional
Configuring LDP MD5 Authentication Optional
Establishing Dynamic LSPs
through LDP
Configuring LDP Label Filtering Optional
Use either the static
or dynamic LSP
configuration method
Configuring BFD for MPLS LDP Optional
Maintaining LDP Sessions
Resetting LDP Sessions Optional
Configuring TTL Processing Mode at
Ingress
Optional
Configuring Sending of MPLS TTL
Timeout Messages
Optional
Managing and Optimizing MPLS
Forwarding
Configuring LDP GR Optional
Configuring MPLS Statistics
Setting the Interval for Collecting LSP
Statistics
Optional
MPLS LSP Ping Optional
Inspecting LSPs
MPLS LSP Tracert Optional
Enabling MPLS Trap Optional