H3C Technologies H3C S7500E Series Switches - Manual (Page 149)

3-67
IngressLsrID : 1.1.1.1
LocalLspID : 1
Tunnel-Interface : Tunnel4
Fec : 4.4.4.4/32
Nexthop : 3.1.1.2
In-Label : 1024
Out-Label : 1024
In-Interface : Vlan-interface1
Out-Interface : Vlan-interface2
LspIndex : 4097
Tunnel ID : 0x22001
LsrType : Transit
Bypass In Use : Not Used
BypassTunnel : Tunnel Index[Tunnel5], InnerLabel[1024]
Mpls-Mtu : 1500
No : 2
IngressLsrID : 2.2.2.2
LocalLspID : 1
Tunnel-Interface : Tunnel5
Fec : 3.3.3.3/32
Nexthop : 3.2.1.2
In-Label : NULL
Out-Label : 1024
In-Interface : ----------
Out-Interface : Vlan-interface4
LspIndex : 4098
Tunnel ID : 0x22002
LsrType : Ingress
Bypass In Use : Not Exists
BypassTunnel : Tunnel Index[---]
Mpls-Mtu : 1500
6) Verify the FRR function
# Shut down the protected outgoing interface on PLR.
[SwitchB] interface vlan-interface 2
[SwitchB-Vlan-interface2] shutdown
%Sep 7 08:53:34 2004 SwitchB IFNET/5/UPDOWN:Line protocol on the interface Vlan-interface2
turns into DOWN state
Perform the display interface tunnel 4 command on Switch A to identify the state of the primary LSP.
You can find that the tunnel interface is still up.
Perform the display mpls te tunnel-interface command on Switch A to verify the configuration of the
tunnel interface.
[SwitchA] display mpls te tunnel-interface
Tunnel Name : Tunnel4
Tunnel Desc : Tunnel4 Interface
Tunnel State Desc : CR-LSP is up
Tunnel Attributes :
LSP ID : 1.1.1.1:1
Session ID : 10
Admin State : UP Oper State : UP