H3C Technologies H3C S7500E Series Switches User Manual

Page 134

background image

3-52

[SwitchC-Vlan-interface3] quit

[SwitchC] interface vlan-interface 2

[SwitchC-Vlan-interface2] mpls

[SwitchC-Vlan-interface2] mpls te

[SwitchC-Vlan-interface2] mpls rsvp-te

[SwitchC-Vlan-interface2] quit

# Configure Switch D.

[SwitchD] mpls lsr-id 4.4.4.9

[SwitchD] mpls

[SwitchD-mpls] mpls te

[SwitchD-mpls] mpls rsvp-te

[SwitchD-mpls] mpls te cspf

[SwitchD-mpls] quit

[SwitchD] interface vlan-interface 3

[SwitchD-Vlan-interface3] mpls

[SwitchD-Vlan-interface3] mpls te

[SwitchD-Vlan-interface3] mpls rsvp-te

[SwitchD-Vlan-interface3] quit

4) Configure IS-IS TE

# Configure Switch A.

[SwitchA] isis 1

[SwitchA-isis-1] cost-style wide

[SwitchA-isis-1] traffic-eng level-2

[SwitchA-isis-1] quit

# Configure Switch B.

[SwitchB] isis 1

[SwitchB-isis-1] cost-style wide

[SwitchB-isis-1] traffic-eng level-2

[SwitchB-isis-1] quit

# Configure Switch C.

[SwitchC] isis 1

[SwitchC-isis-1] cost-style wide

[SwitchC-isis-1] traffic-eng level-2

[SwitchC-isis-1] quit

# Configure Switch D.

[SwitchD] isis 1

[SwitchD-isis-1] cost-style wide

[SwitchD-isis-1] traffic-eng level-2

[SwitchD-isis-1] quit

5) Create an MPLS TE tunnel

# Create an MPLS TE tunnel on Switch A.

[SwitchA] interface tunnel 1

[SwitchA-Tunnel1] ip address 7.1.1.1 255.255.255.0

[SwitchA-Tunnel1] tunnel-protocol mpls te

[SwitchA-Tunnel1] destination 4.4.4.9

[SwitchA-Tunnel1] mpls te tunnel-id 10

[SwitchA-Tunnel1] mpls te signal-protocol rsvp-te

[SwitchA-Tunnel1] mpls te commit

[SwitchA-Tunnel1] quit