NewTek TriCaster 855 User Manual
Page 284
Page | 268
DESTINATION
Select drives or other storage volumes as targets for the
different recordings using the Destination drop-down
menu.
Figure 254
SECONDARY RECORDINGS
NewTek’s IsoCorder technology provides the ability to record multiple output a/v streams. An
additional list of Secondary sources can be added in the Record Configuration panel (the number
depends on the model). These are configured in exactly the same manner as the Primary source
discussed previously.
Figure 255
Click the Add Source button to add an entry to the Secondary list, up to the total limit for the
model – either four (TriCaster 455) or eight (TriCaster 855) sources in total, including the Primary
source. To remove an entry, click the corresponding [X] button at left.
Caution: It is recommended that any single drive serve to capture one or two video sources at
most, and a warning message is displayed if you exceed this number when configuring
Destination settings. TriCaster does not prevent you from exceeding this limit, however, when
you are confident that very fast volumes are capable of handling the load.