Measurement Computing eZ-Analyst rev.14.1 - Manual (Page 37)

eZ-Analyst 978791 Edit Menu 4-1
Edit Menu 4
The “Edit Menu>Configuration> Preferences tab” section discusses a
Measurement Mode panel. This panel is of importance to file overwrite
protection; and should be understood (see page 4-39).
The Edit Menu provides a means of configuring eZ-Analyst in regard to both functionality
and appearance. The menu contains the following selections:
Configuration Window …… 4-1
Analyzer Tab …… 4-3
Input Channels Tab …… 4-13
Analog Input Channels …..4-14
Tach Channels ….. 4-17
FFT Setup Tab …… 4-22
Recording Setup Tab …… 4-30
Block Rejection Tab …… 4-34
Octave Setup Tab …… 4-36
Preferences Tab …… 4-38
Output Channel Setup ….. 4-42
ZonicBook/618E and WaveBook Waveform Output …… 4-42
640u and 640e Waveform Output …… 4-44
Playback Setup Window …… 4-54
Display Preferences Window …… 4-55
Edit Menu >
Configuration . . .
Configuration provides a means of changing the majority of eZ-Analyst settings in regard to
how data is collected and conditioned.
The Configuration selection displays one of several tab dialogs as listed in the preceding
contents and discussed in the following pages. Before reading about the Analyzer tab you
should read page 4-2, which contains important information on frequency resolution.