Measurement Computing eZ-Analyst rev.14.1 - Manual (Page 127)

Appendix A 878193 Keyboard Controls A-1
Appendix A
- Keyboard Controls for eZ-Analyst A
This appendix consists of several hot key tables for the benefit of those who prefer to use keys in
place of mouse/cursor interaction with a GUI. However, for certain functions, such as changing axis
scales, a mouse will be needed. Mouse use is pointed out in the tables, when applicable.
Record / Playback Control
Keys
Function Comments
p Play Forward -----
+ p Play Backward -----
o Step Forward and Record -----
+ o Step Backward and Record -----
H Halt Playback -----
Measurement, Scope, and Generator Control
Keys
Function Comments
H Halt the measurement -----
R Start recording -----
S Start Scope Mode (Measurement) -----
W Turn the signal generator On -----
Menu and Window Control
Keys
Function Comments
Opens the Edit Menu. -----
Opens the Configuration Window. After pressing Alt + E to access the Edit
Menu, press C. You will need a mouse to
access all panels. Also, see Ctrl +C.
Opens the Display Preferences Menu. After pressing Alt + E to access the Edit
Menu, press D.
Alt + E …
… C
… D
… P
Opens the Playback Setup window. After pressing Alt + E to access the Edit
Menu, press P. Use the Tab and arrow keys to
make selections within this window. Then hit
.
Alt + F Opens the File Menu. -----
Alt + W Opens the Window Menu. You will need a mouse to make selections.
Ctrl + C Opens the Configuration window. You will need a mouse to access all panels.
An alternative to Ctrl + C is to press C when
the Edit Menu is open.
Ctrl + O Opens the Open File Dialog window. From within the window, use the Tab and
arrow keys. An alternative to Ctrl + O is to
press O when the File Menu is open.
Ctrl + P Presents the Print Dialog window. An alternative to Ctrl + P is to press P when
the File Menu is open.
Ctrl + D Presents the Display Menu, also
referred to as the Plot Display
Characteristics Menu.
Refer to the following table for control options
related to the Display Menu.