Measurement Computing eZ-Analyst rev.14.1 - Manual (Page 11)

eZ-Analyst 978891 Software Installation, 600 Series 1-3
IOtech 600 Series
Dynamic Signal Analyzers for Vibration Analysis & Monitoring
640u and 650u (USB2.0)
For a 640u or 650u verify that you have the following items.
640u or 650u
USB Cable
Dynamic Signal Analysis CD
License Key for eZ-Analyst
Windows 2000 SP4 and Windows XP users:
PC with Intel ™ Pentium, 1 GHz or equivalent;
512 MB memory; 10 GB disk space
Windows Vista users:
PC must be Windows Vista Premium Ready
640e and 650e
(Ethernet)
For a 640e or 650e verify that you have the following items.
640e or 650e
TR-2U Power Supply
Ethernet Patch Cable
Dynamic Signal Analysis CD
License Keys for eZ-Analyst
Windows 2000 SP4 and Windows XP users:
PC with Intel ™ Pentium, 1 GHz or equivalent;
512 MB memory; 10 GB disk space
Windows Vista users:
PC must be Windows Vista Premium Ready
To Install the Software (Applies to all 600 Series models)
1. Close all running applications on the host PC.
2. Insert the Dynamic Signal Analysis CD into your CD-ROM drive and wait for the CD to auto-run.
An Opening Screen will appear.
4. Click the <ENTER SETUP> button.
5.
From the hardware selection screen [which follows a licensing agreement], select the applicable
device (640e, 640u, 650e, or 650u) from the drop-down list and follow the on-screen instructions.
Reference Notes:
o After the software is installed you can setup your 600 Series analyzer and connect it to the
host computer. Instructions are included in a Quick Start shipped with the device. The
Dynamic Signal Analysis CD includes PDF versions of the 600 Series quick starts and a
user’s manual.
o Adobe Acrobat PDF versions of documents pertaining to IOtech 600 Series analyzers are
included on the Dynamic Signal Analysis CD. In addition, they are automatically installed
onto your PC’s hard-drive as a part of product support at the time of software installation.
The default location is the Programs group, which can be accessed via the Windows
Desktop Start Menu.