Reactivation methods – Gasboy Fuel Point PLUS Station User Manual
Page 93
Fuel Point PLUS Station Equipment Manual
93
Battery was removed/battery is fully drained
Once a unit is deactivated,you'll be notified as follows:
In Status → Alerts screen (see
)
In Status → WGT Map screen, the µWNR is colored in gray (see
The µWNR LED indicator blinks three times when the unit is swayed
7.5.2. Reactivation Methods
There are three ways to reactivate µWNR units:
Using the Station Manager Tag:
1.
Attach the Station Manager Tag to the deactivated unit
2.
Tilt the unit to ensure it wakes up. The LED indicates that the unit is blocked, blinking three times
3.
The Station Manager Tag reactivates the unit. The unit becomes operational and the LED blinks
twice (as it is reactivated and the tag was recognized)
Sending a reactivation command from the
Note: When reactivating the µWNR unit from the Setup Site, the unit becomes fully
functional after next fueling. Simulate refueling (tilt the unit and attach to a Fuel Ring) to
apply reactivation.
Reprogramming the µWNR (setting
Station ID
,
Pump#
,
Nozzle#
anew) using the Wireless
Vehicle Programmer or the Wireless Nozzle Reader Programmer. See