Log level – Gasboy Fuel Point PLUS Station User Manual
Page 64
64
Fuel Point PLUS Station Equipment Manual
Element
Description
Add New Vehicle Code
Adds a text box to the Vehicle Code table
Remove Last Vehicle Code
Removes the last entered vehicle code from the table
µWNR Removal Protection
Enables/disables tamper resistant feature that prevents unau-
thorized removal. If disabled, µWNR units will not be deactivated also
if an attempt to remove the unit was made (i.e. removal protection
ring was taken off)
Allow fueling while DP is missing
Allows fueling also when Fuel Ring is correlated with DataPass, but
DP was not found by the network. If set to Yes the following two
options become available
Disable search for DataPass if was not read at
first attempt
If disabled, and DP unit was not found while µWNR is reading
the FP, the network will search again for the DP unit for 15
seconds and only then refueling will start
If enabled, the network will not search again for the DP unit and
refueling will start automatically
Reported Odometer/E.H. Value if DP exist but
not found
Select the value to be reported for both Odometer and Engine Hour
parameters when DP was not found
Submit
Saves the settings of the current tab. To apply the changes, see
6.5.7. Log Level
In this tab (see
), you can set what type of information is gathered in logs and how to collect
these logs files, as it may be required for maintenance and troubleshooting purposes.
You will be able to receive these logs by connecting your PC to the Master Wireless Gateway via LAN,
using a terminal application (such as HyperTerminal).