Importing network settings, Figure 6-37 - administrator - setup distribute tab, Figure 6-36 – Gasboy Fuel Point PLUS Station User Manual
Page 82
82
Fuel Point PLUS Station Equipment Manual
Figure 6-36 - Table Rebuilding not Allowed while Fueling Warning
6.8.3. Importing Network Settings
You can import previously saved setup files and then send them to all the units at the station remotely
from the Master Wireless Gateway(see
,
).
The setup files are first uploaded to the Master Wireless Gateway and then sent to the other Wireless
Gateway units. Setup takes effect after update is finished and the network is reset (Status:
Complete
)
Figure 6-37 - Administrator - Setup Distribute Tab
1.
Click on the
Browse
button the in the unit row. A file selection dialog appears
2.
Select the previously saved .XML file and click
Upload
. The file is uploaded to the Master Wireless
Gateway
3.
Repeat these steps for every unit you want to remotely set up
4.
In the Select column, select the checkbox in the corresponding row or click
Select All
to select all
the units
5.
Define how the execute the update. Select one of the following:
Update Immediate
: The update is executed immediately after the file was received by
the Wireless Gateway