Gasboy Fuel Point PLUS Station - Manual (Page 2)

SAFETY CONSIDERATIONS
Carefully read all warnings and instructions, provided to help you install and maintain the
equipment safely in the highly flammable environment of a gas station.
Disregarding these warnings and instructions could result in serious injury and property loss or
damage.
It is your responsibility to install, operate and maintain the equipment according to the
instructions in this manual, and to conform to all applicable codes, regulations and safety
measures. Failure to do so could void all warranties associated with this equipment.
Ensure that the installation is performed by experienced personnel, licensed to perform work in
gas stations and in flammable environments, according to the local regulations and all relevant
standards.
WARNING - EXPLOSION HAZARD
Use a separate conduit for intrinsically safe wiring. Do not run any other wires or cables through
this conduit, since it may lead to an explosion hazard.
Use standard test equipment only in the non- hazardous area of the fuel station, and approved
test equipment for the hazardous areas.
Installation and service must comply with all applicable requirements of the National Fire
Protection Association NFPA-30 “Flammable and Combustible Liquids Code”, NFPA-30A
“Automotive and Marine Service Station Code”, NFPA-70 “National Electric Code”, federal,
state and local codes and any other applicable safety codes and regulations.
Do not perform metal work in a hazardous area. Sparks generated by drilling, tapping and other
metal work operations could ignite fuel vapors and flammable liquids, resulting in death, serious
personal injury, property loss and damage to you and other persons.
CAUTION - SHOCK HAZARD
Dangerous AC voltages that could cause death or serious personal injury are used to power the
equipment. Always disconnect power before working on the equipment. The equipment may
have more than one power supply connection point. Disconnect all power before servicing.