Gasboy Fuel Point PLUS Station - Manual (Page 102)

102 Fuel Point PLUS Station Equipment Manual
9.3.2. Replacing WNR Battery
µWNR battery should be replaced when the capacity drops below a certain level. The system includes two
battery level indicators.
To view the µWNR battery level, do one of the following:
Master Wireless Gateway Setup Site
1. In the Master Wireless Gateway Setup Site, go to Status → Wireless Gateway Map .
See Monitoring Station Equipment
2. This screen displays data on the station equipment in a hierarchical tree structure.
Expand the µWNR unit node
3. The battery icon is red-colored when the battery level is below 30%
Master Wireless Gateway VIU Log
1. In the Master Wireless Gateway Setup Site, go to Setup → Log Level and select the
Data checkbox in the VIU row. See Log Level
2. Connect your PC to the Master Wireless Gateway via LAN, using a terminal application
(such as HyperTerminal)
3. Attach the µWNR to a Fuel Ring to receive data
4. The Battery VccLevel parameter shows the battery level in percentage. Please note that
the value is shown in 1/100 (see Figure 9-1 )
Figure 9-1 - VIU Log - Example
Note: After battery level drops below 30%, replace the battery at a convenient time. Life
span depends on different factors, but mostly on the frequency of use.
Note: Do not mix old and new batteries or battery types. Use only P/N 812539200
(Manufacturer P/N XENO XLP-055F)
9.3.2.1. Replacing Front Units Battery
1. Remove the three Allen screws that secure the back and front covers (see Figure 9-2 ) and detach
the back cover