Gasboy Fuel Point PLUS Station - Manual (Page 59)

Fuel Point PLUS Station Equipment Manual 59
Element Description
WGT
Address
Logical address of the Wireless Gateway to which the Wireless Nozzle Reader is routed
Note : A Master Wireless Gateway/WGT unit can support up to 16 Wireless Nozzle Readers
Group
As part of Wireless Gateway-Station Controller protocol, Wireless Nozzle Readers are grouped into a
group of 16 units. Each unit is assigned a Channel number. If the station is equipped with more than 16 Wire-
less Nozzle Readers, you may add groups as needed, by clicking Add Group. Up to 7 groups can be
defined (112 Wireless Nozzle Readers)
Setup
Source
Enables importing a Wireless Nozzle Readers setup file :
Leave the default option selected - Manually to manually fill in the fields in this screen
Select From Setup File to import an .XML file
The Auto option is currently N/A
Status Table
Once Master Wireless Gateway and the Wireless Gateway units have been set-up, this table (see Figure 6-
12) shows the status of the Wireless Gateways . Verify that the status of all the units is Synchronized.
Nevertheless, at this point the table should be empty
Submit Saves the settings of the current tab. To apply the changes, see Saving Setup
Figure 6-12 - Status Table
6.5.4. Setting Group Communication
This tab enables you to set the communication channels between the groups of Wireless Nozzle Readers
set in the previous tab and the Station Controller. (See
Figure 6-13 , Table 6-6 ).
Note: These parameters must match the Station Controller. If you are using SiteOmat
Station Controller, see
Setting the Station Controller .