beautypg.com

Gasboy Fuel Point PLUS Station User Manual

Page 80

background image

80

Fuel Point PLUS Station Equipment Manual

1.

In the

File Type

drop-down, select the type of software component

2.

Click on the

Browse

button on the bottom screen. A file selection dialog appears

3.

(Optional) In the

Force Upload

drop-down, change default to

YES

to enforce uploading a version

older than the current version installed in the system.

Note: use this option only when a previous software version must be installed.

4.

Select the file and click

Upload

. The file is uploaded to the Master Wireless Gateway

5.

(Optional) You can schedule when the Master Wireless Gateway sends the uploaded version to the
Wireless Gateway units in the network during the day (otherwise the component is immediately
sent). To do so:

a.

Select the

Distribute at time range

checkbox. Time range fields are displayed

b.

Enter the start and end hour in the

From Time

and

Until Time

fields

6.

Define how the execute the update. Select one of the following:

Update Immediate

: The update is executed immediately after the component was

received by the Wireless Gateway

Update at Date & Time

: The update is executed at a specific time. When this option

is selected, Update Time fields are displayed. Enter the update

Date

and

Time

Update at Admin Command

: The update is executed only after all the Wireless

Gateway units received the component. When this option is selected, additional
options appear:

Automatic

: When this option is selected, the network is automatically reset

Manual

: (default). Reset is manually initiated by the user by clicking

Send

Update without Reset

: Update is executed immediately, but new version takes effect

after the network is manually reset. See

Saving Setup

Best Practice: It is highly recommended to use Update at Admin Command - Manual.
Verify that the status off all the units in the table is Pending and it remains so for about 10
minutes and then reset the network (by clicking Send). Please remind that the network
can only be reset when the station is idle (there is no refueling).