Gasboy Fuel Point PLUS Station - Manual (Page 69)

Fuel Point PLUS Station Equipment Manual 69
Note: You may reuse these settings in other similar stations. See Setting Minimal
Setup .
6.6. Setting the Wireless Gateway Units
In order to establish the network, login into each Wireless Gateway unit deployed at the station, click
Setup and perform the following settings in the Minimal Setup tab (see Figure 6-24 , Table 6-3 ).
Figure 6-24 - Minimal Setup - Wireless Gateway Units
1. In the Station ID field, enter the same ID used for the Master Wireless Gateway
2. In the Logical Address field, enter a unique address for the Wireless Gateway unit, between 3
and 254. Each Wireless Gateway must have a different logical address
3. (Optional) In the Location field, enter a descriptive free-text to easily identify the unit
4. In the Wireless Active Channels section, select the same channels used for Master Wireless
Gateway to establish the network
5. Click Submit
6. Optional: In the General Setup tab (see Figure 6-9 ), in the IP Address field, modify the factory set
IP address of the unit and then click Submit . For example, you may want to change the IP from
192.168.1.170 to 192.168.1.17X (to match the unit's logical address) so the next time you browse
to the unit locally (and not via Master Wireless Gateway), you will use this IP
7. Apply the changes, see Saving Setup