Updating software, Software update workflow, Updating software components – Gasboy Fuel Point PLUS Station User Manual
Page 79
Fuel Point PLUS Station Equipment Manual
79
Figure 6-33 - Table Rebuilding not Allowed while Fueling Warning
6.8.2. Updating Software
You can remotely update the software of all station equipment from the Master Wireless Gateway and
view a list of currently installed and stored software components (see
)
Figure 6-34 - Administrator - Software Distribute Tab
6.8.2.1. Software Update Workflow
Software version is uploaded to the Master Wireless Gateway and saved in its Flash memory
(Status:
In Progress
)
The Master Wireless Gateway then sends this version to the other Wireless Gateway units.
The new version is stored in each Wireless Gateway memory. At this stage the status can be:
Pending
Inactive
: S/W version does not match the Wireless Gateway type, or is older than
the current version. Updates in Inactive status will not be executed
Update is executed. New version takes effect after update is finished and the network is reset
(Status:
Complete
)
6.8.2.2. Updating Software Components