Gasboy Fuel Point PLUS Station - Manual (Page 17)

Fuel Point PLUS Station Equipment Manual 17
CHAPTER 1 INTRODUCTION
1.1. General
Gasboy's Fuel Point PLUS is a scalable end-to-end vehicle identification system, which offers:
Wireless, state-of-the-art RFID-based solution
True self service and secured payment
Robust and secure wireless link to multiple forecourt devices
A wide range of vehicle data
This manual provides installation and setup instructions for Fuel Point PLUS station-side equipment. For
vehicle units installation and setup, please refer to Fuel Point PLUS Vehicle Units Installation and
Programming Manual P/N MDE-4868.
1.2. Solution Description
Fuel Point PLUS allows fast refueling with no need for cash, card or coupon payment, bringing numerous
advantages and significant savings in fuel expenses for both fleet vehicles and private customers.
Once a vehicle arrives at the station the DataPass in-vehicle unit transmits vehicle data to the
wireless gateway (Wireless Gateway), including:
Identification
Odometer and E.H.
Additional data (such as diagnostics, fuel level and more)
When a fueling nozzle is inserted into the authorized vehicle's fuel inlet the µWNR reads
encrypted Fuel Ring RFID data and sends it to the Wireless Gateway
Then, the Wireless Gateway combines both DataPass and Fuel Ring data and sends it to the
Station Controller. Fuel Point PLUS is designed for full integration with other leading forecourt
automation providers' POS/FCC
The Station Controller sends a request to the Authorization Server, which returns approval,
balance and restrictions, if any
Once approved, the pump is opened. All this happens within seconds and with no human
intervention
The system monitors the entire fueling session and if the nozzle is removed, the pump is
automatically stopped so that refueling continues only when the nozzle is put back into the
same car
Figure 1-1 shows a basic diagram of Gasboy's Fuel Point PLUS architecture.