Gasboy Fuel Point PLUS Station - Manual (Page 90)

90 Fuel Point PLUS Station Equipment Manual
Step Display Description
1 Enter user name
2 Enter password
3
The main menu is displayed. Use the UP/DOWN arrow keys to select Ini-
tialize NR
4 Select the Init NR option
5
Sway the µWNR (or press the µWNR-T activation switch) and attach to
the rear cover of the Programmer. Press SEND
6 Wait a few seconds until the Programmer recognizes the unit
7 Enter the Station ID as set in Master Wireless Gateway
8 Enter the number of the pump as set in Master Wireless Gateway
9
Enter the number of the nozzle on which the unit is installed as set in
Master Wireless Gateway
10
Do one of the following:
Press Y for a brand new unit, or for a reprogrammed unit after
battery replacement
Press N if the unit is reprogrammed but the battery wasn't replaced
Table 7-1 - µWNR Programming Sequence - Home Base Stations