Gasboy Fuel Point PLUS Station - Manual (Page 47)

Fuel Point PLUS Station Equipment Manual 47
Caution: Only authorized technicians are allowed to modify jumper default settings.
Jumper # Name Description
J2 Watch Dog
J3 Reset
J4 (Pins 1-2) 3.3.V SAM power 3.3V
J4 (Pins 2-3) 5V SAM power 5V
Table 5-4 - Jumper Settings
5.5.5. LED Indicators
(See Table 5-5 and Table 5-6 )
LED # Name Description
DL2 100
Indicates communication rate:
Lit: 100 BPS
Off: 10 BPS
DL3 ACT Blinks during active communication
DL4 LNK Constantly lit when Ethernet is connected
Table 5-5 - LEDs - PCB left side
LED # Name Description
DL9 GP
Constantly lit
Blinks during data transfer over external
communication (Ethernet, RS-232, RS-485)
TAG Not used
RST Lights during reset
5V Indicates that +5V is active
DL7 3V Indicates that +3.3V is active
DL8 1V8 Indicates that +1.8V is active
Table 5-6 - LEDs - PCB Right Side