Gasboy Fuel Point PLUS Station - Manual (Page 76)

76 Fuel Point PLUS Station Equipment Manual
Figure 6-30 - Status - µWNR Reactivation
Do one of the following:
To reactivate a specific µWNR: In the Reactivation column, select the checkbox in the
corresponding row and then click Submit
To reactivate all deactivated units: Click Select All and then click Submit
Note: When reactivating the µWNR unit from the Setup Site, the unit becomes fully
functional after next fueling. Simulate refueling (tilt the unit and attach to a Fuel Ring) to
apply reactivation.
Field Description
Reactivation Select this checkbox to reactivate the unit
Group# Unit's group (for communication with Station Controller)
Channel# Logical channel for communication with the controller
Pump# Number of the pump to which the unit is associated
Nozzle# Number of the nozzle on which the unit is installed
Wireless Gateway
Address
Logical address of the Wireless Gateway to which the µWNR is routed
Location Wireless Gateway's location
Table 6-12 - Reactivation Table Fields