Gasboy Fuel Point PLUS Station - Manual (Page 66)

66 Fuel Point PLUS Station Equipment Manual
Source Information
TcpS Server communication with the FCC (Forecourt Controller)
TcpC Client communication with the FCC
VIT Communication between Wireless Gateway and WNR
FCC Communication with the FCC
VISP RF communication between Master Wireless Gateway and the Wireless Gateway units
DIAG Internal system diagnosis processes
AUTH Authorization processes
MAIN Internal system processes (written into Flash memory)
DataPass Communication with DataPass units
VIU Data on vehicle units received during refueling
LOG Logs and events
WEB Changes made to network using this Setup Site
COM0 COM0 device's serial port
COM1 COM1 device's serial port
CWGT Communication with the router
ADMIN
Administration tasks, station management, data distributed from Master Wireless Gateway to the
Wireless Gateway unis
OrData Communication with OrData system
Table 6-9 - Log Sources
6.5.8. Saving Setup
After finishing setting up the unit, click Apply on the Save Setup tab (see Figure 6-18 )to save the
changes into the device's Flash memory.
Note: This step is essential! If this step is skipped, all settings will be lost, even if you
clicked on the Submit button on each tab.