Rebuilding tables, Exporting network settings – Gasboy Fuel Point PLUS Station User Manual
Page 83
Fuel Point PLUS Station Equipment Manual
83
Update at Date & Time
: The update is executed at a specific time. When this option
is selected, Update Time fields are displayed. Enter the update
Date
and
Time
Update at Admin Command
: The update is executed only after all the Wireless
Gateway units received the files. When this option is selected, additional options
appear:
Automatic
: When this option is selected, the network is automatically reset
Manual
: (default). Reset is manually initiated by the user by clicking
Send
Update without Reset
: Update is executed immediately, but new setup takes effect
after the network is manually reset. See
6.
Click
Distribute Setup Files
Best Practice: It is highly recommended to use Update at Admin Command - Manual.
Verify that the status off all the units in the table is Pending and it remains so for about 10
minutes and then reset the network (by clicking Send). Please remind that the network
can only be reset when the station is idle (there is no refueling).
Column
Description
Select
Selects the unit
Logical Num
Unit's logical address
Wireless Gateway Type
Unit type: Master Wireless Gateway (Master Wireless Gateway) or Wireless Gateway
Location
Wireless Gateway's location
Setup File
Selects the .XML setup file
Status
Setup update status: In Progress → Pending → Complete
Table 6-15 - Wireless Gateway Station Map Table Parameters
6.8.3.1. Rebuilding Tables
See
6.8.4. Exporting Network Settings
You can connect to MWGT and export setup files from Master Wireless Gateway and Wireless Gateway
units to reuse in other similar stations. See
.(See
).