Gasboy Fuel Point PLUS Station - Manual (Page 62)

62 Fuel Point PLUS Station Equipment Manual
Parameter Description
Vehicle Units
List
Sets which vehicle units should be read at the station.
Select All: selects all the units
Clear all: deselects all the units
RSSI Nom-
inal/Special
Levels
Note : These fields are relevant for backward compatibility to VIU 3/35/4/45 legacy vehicle units.
µWNR base
sample rate Sets the interval for sampling the Fuel Ring while refueling, to ensure that the nozzle is not removed
while the pump is dispensing. Default: 15 seconds
Status Table
Once Master Wireless Gateway and the Wireless Gateway units have been set-up, this table (see Figure
6-15) shows the status of the Wireless Gateways . Verify that the status of all the units is Synchronized.
Nevertheless, at this point the table should be empty
Submit Saves the settings of the current tab. To apply the changes, see Saving Setup
Table 6-7 - WNR Setup Elements
Figure 6-15 - Status Table
6.5.6. Security & DP SW
The system enables you to remotely upgrade software versions of all wireless network components via
Master Wireless Gateway.
From this tab (see Figure 6-16 , Table 6-8 ). you can define whether to upgrade DataPass in-vehicle unit
firmware with the latest version stored in Master Wireless Gateway, as soon as the vehicle arrives the
station. In addition, you may define various security settings
If your system is not equipped with DataPass units, or you'd like to leave these settings as is,
click Submit
Click on drop-down menu and select Yes to enable remote upgrade of DataPass units