Gasboy Fuel Point PLUS Station - Manual (Page 70)

70 Fuel Point PLUS Station Equipment Manual
After setting all the terminals, verify their link quality. See Viewing Wireless Gateway
Units Status . Link quality must be Excellent for all the units. Otherwise, the installation is
incorrect and should be checked (Master Wireless Gateway location, Wireless Gateway
units location).
Notes:
Station ID and Wireless Active Channels parameters must be identical for
Master Wireless Gateway and all Wireless Gateway units. See Setting
Minimal Setup
Logical Address must mach settings done in Master Wireless Gateway, while
associating µWNR to Wireless Gateways. See WNR Configuration List .
Note: When setting up a unit for the first time, you must always click Submit before
continuing to the next tab. If not, the following message appears (see ):
Figure 6-25 - Submit Button Warning
6.6.1. Updating Software Locally
You can locally update the software of a Wireless Gateway unit (see Figure 6-26 ).