Fluke Biomedical Cufflink - Manual (Page 63)

Operation
Using Auto Sequences
2
2-35
fcv113.eps
F1 F2 F3 F4 F5
Auto-1 3
Blood Pressure HR (BPM) CYCLES
(5) 150/100 ( 40) Adult 120 1
(6) 120/ 80 (ASC)Arrhyth 80 1
(7) 200/150 (165) Adult 160 1
(8) 120/ 80 (PVC)Arrhyth 80 1
Store No/Dec PgDn PgUp Yes/Inc
fcv114.eps
2. Use the Up and Down arrow keys to highlight a test parameter.
3. Press F4 or F5 to increase or decrease the value, respectively.
4. Press F3 Store to save the new data.
5. Press F1 PgUp or F2 PgDn to scroll up or down, respectively, between pages.
6. Select and change parameters on the new page as described in the previous steps.
7. Press the
Esc key to quit and return to the Auto Sequence Utilities screen.
View
The View utility lets the user see the current configuration of an auto sequence. These
displays are view only; to change settings, use the Edit utility.
To view the content of an auto sequence:
1. From the
Auto Sequence Utilities screen, highlight View and select an auto
sequence with the function keys.
2. Press F1 or F2 to scroll up or down, respectively, between pages.
3. Press the Esc key to quit and return to the Auto Sequence Utilities screen.
Name
The Name utility lets the user change the eight character name of an auto sequence.
To change the name of an auto sequence:
1. From the
Auto Sequence Utilities screen, highlight Name and select an auto
sequence with the function keys. A box with the current auto sequence name appears.
AUTO-1
2. Press the Left and Right arrow keys to move the blinking cursor to the character to
be changed; then use the Up and Down arrow keys to scroll through the choices.
3. If saving the new name is not desired, press the Esc key. If saving the new name is
desired, press the Ent key. In either case, the Analyzer returns to the Utility
submenu.