Fluke Biomedical Cufflink - Manual (Page 54)

Cufflink
Operators Manual
2-26
5. If the printer is not connected properly or if there is a fault in the printer system,
including the cable, the Analyzer displays:
Printer Not Ready
ENT = Retry
ESC = Abort
3. Press the Ent key to attempt the print test again or press the Esc key to exit the print
test.
Key Test
The Key Test verifies that the Analyzer front panel keyboard is functional.
To carry out the Key Test:
1. On the
System Utilities screen, highlight the Key Test option and press the Ent
key. The Key Test screen displays.
2. Press each key on the keyboard one at a time. A description of each key should
appear after the word Keyboard . If a description of the key that has been pressed
does not display, contact the Fluke Biomedical Service Center.
3. Press the Esc key four times to exit the Key Test.
Speaker Test
The Speaker Test verifies speaker operation by activating it with signals of various
frequencies. Adjustments of frequency (pitch of the sound) and period (length of sound)
are also possible.
To carry out the Speaker Test:
1. On the
System Utilities screen, highlight the Speaker Test option and press the
Ent key. The Speaker Test screen displays.
2. Test the various parameters as desired, according to the instructions in Table 2-8.