Fluke Biomedical Cufflink - Manual (Page 103)

Remote Operation
Command Descriptions
3
3-29
MKARM70
Use this command to set blood pressure simulation to Adams Adult 255/195, with a heart
rate of 200 BPM. There are no parameters for this command.
Example
Simulate a specific adult BP of 255/195 at 200 BPM.
Command Mkarm70
Results The Analyzer runs the Adams Adult 255/195, heart rate is set to 200
BPM.
Returned Data *
MKARMNEO10
Use this command to set blood pressure simulation to Adams Neonate 60/30, with a heart
rate of 40 BPM. There are no parameters for this command.
Example
Simulate a specific neonate BP of 60/30 at 40 BPM.
Command mkarmneo10
Results The Analyzer runs the Adams Neonate 60/30, heart rate is set to 40
BPM.
Returned Data *
MKARMNEO20
Use this command to set blood pressure simulation to Adams Neonate 80/50, with a heart
rate of 60 BPM. There are no parameters for this command.
Example
Simulate a specific neonate BP of 80/50 at 60 BPM.
Command mkarmneo20
Results The Analyzer runs the Adams Neonate 80/50, heart rate is set to 60
BPM.
Returned Data *
MKARMNEO30
Use this command to set blood pressure simulation to Adams Neonate 100/65, with a
heart rate of 80 BPM. There are no parameters for this command.
Example
Simulate a specific neonate BP of 100/65 at 80 BPM.
Command mkarmneo30
Results The Analyzer runs the Adams Neonate 100/65, heart rate is set to 80
BPM.
Returned Data *