Using auto sequences, Executing an auto sequence – Fluke Biomedical Cufflink User Manual

Page 61

Operation

Using Auto Sequences

2-33

3. Press

F4 Clear

to clear the receive box on the Analyzer display. When sending data

from the controller, information appears in the receive box.

4. Press the

Esc

key to exit and return to the

Comm

submenu.

Using Auto Sequences

Using auto sequences, the user can simulate any of eight different blood pressures with

each of the adult, neonate, and arrhythmias categories, in any combination. In addition,

the user can also select the heart rate and cycle count (number of times that the Analyzer

simulates a specific blood pressure — from 1 to 99). These functions are accessed from

the

Auto

submenu:

Select BP Press Util Comm

Auto

Execute

Execute
Utility

Execute auto sequences

fcv097.eps

Executing an Auto Sequence

To execute an auto sequence:
1. From the

Auto

submenu, highlight

Execute

and press the

Ent

key. The

Execute

Auto Sequence

screen displays:

*** Execute Auto Sequence ***

AUTO-3

AUTO-5

AUTO-2

AUTO-1

AUTO-4

fcv109.eps

2. Press the function key below the auto sequence name to start the desired auto

sequence.

3. If there is a pressure test, leak test, or pop off test in the auto sequence, press

when these tests are done to advance the auto sequence. The Analyzer completes the

blood pressure simulations of the auto sequence automatically.
If the auto sequence is configured to print, it will do so when the cuff deflates after

the last blood pressure test. Otherwise the Analyzer returns to the

Execute Auto

Sequence

display.