Fluke Biomedical Cufflink - Manual (Page 110)

Cufflink
Operators Manual
3-36
PUMPPCB
Use this command to determine if a pump circuit board is installed in the Analyzer. There
are no parameters for this command.
Example
Check for pump PCB.
Command pumppcb
Results The analyzer scans for the board.
Returned Data Pump PCB installed or Pump PCB not installed
RCUSERENV
Use this command to copy the user envelope data from EEROM to RAM. There are no
parameters for this command.
Example
Recall user envelope data.
Command rcuserenv
Results Cufflink writes the user envelope data stored in EEROM to RAM.
Returned Data *
RDCLOCK
Use this command to display the current time, day, and date. The data returned to the
controller is configured as hour:min:sec mo/date/yr day (0 = Sunday, 6 = Saturday).
There are no parameters for this command.
Example
Display the time and date for Monday, December 5th.
Command rdclock
Results The Analyzer reads the clock information.
Returned Data 13:14:12 12/05/91 1; varies, depending on the current date
RDENVGAIN
Use this command to show the pressure envelope gain value (displayed in %) on the
controller's display. There are no parameters for this command.
Example
Display the envelope gain value.
Command rdenvgain
Results reads the envelope gain value from ROM.
Returned Data 101; varies, depending on the current setting for envelope gain