Fluke Biomedical Cufflink - Manual (Page 38)

Cufflink
Operators Manual
2-10
Table 2-2. Measured Test Parameters
Abbreviation Parameter Unit of Measurement
CuffPres On-line Cuff Pressure mmHg
CuffPeak Peak Cuff Pressure mmHg
DeflRate Deflate Rate mmHg/second
DeflTime Deflate Time seconds
InflRate Inflate Rate mmHg/second
InflTime Inflate Time seconds
TotlTime Total Measurement Time seconds
The current blood pressure target value is shown just below the list of test parameters on
the Makearm display and indicates which BP target value is currently being simulated
by the Analyzer.
Selecting Heart Rate (HtRate)
To select the heart rate to be tested:
1. From the
Select BP submenu, highlight ADAMS Adult (or ADAMS Neonate)
and press the Ent key. The ADAMS Adult Family Target Values screen
displays:
F1 F2 F3 F4 F5
*** ADAMS Adult Family ***
Target Values
60/30 (40)
150/100 (115)
80/50 (62) 200/150 (165)
100/80 (75) 100/80 (75)
HtRate AdjEnv Print ZeroPres
fcv100.eps
2. Highlight the blood pressure target value to be simulated.
3. Press
F1 HtRate .
Note
The term ADAMS Family refers collectively to Adult and Neonate options.