Pop time – Fluke Biomedical Cufflink User Manual

Page 52

Cufflink

Operators Manual

2-24

Pop Time

The

Pop Time

option enables the user to adjust the popup window delay time. When

certain functions are chosen from a display (for example, when choosing a blood pressure

target value from the

Select BP

submenu), a message surrounded by a box briefly

appears over the information on the display. The box containing this information is called

the popup window. The period of time during which the popup window displays is called

the pop time.
An adjustment in the pop time may be necessary if the popup window flashes on the

display too fast to read or if the window stays on the display too long and produces

unwanted delays in the testing procedure.

Note

The pop up window can be completely eliminated by setting the pop time to

0.00 seconds, a desirable option for the experienced user who does not

need such reminders.

To adjust the pop time:
1. From the

Util

submenu, highlight

Pop Time

and press the

Ent

key. The

Pop Time

screen displays (actually labeled

Adjust Pop Window Delay Time

), showing the

current pop time (delay time) value in seconds:

*** Adjust Pop Window Delay Time ***

Delay Time (sec): 3.00

fcv105.eps

2. Change the pop time by using the

and

Down arrow

keys; the cursor is not

visible on the

Pop Time

display. The range of values for Pop Time is from 0.00

seconds to 5.00 seconds and changes by 0.25 second steps. Pressing the

Up arrow

key once increases the value by 0.25 seconds. Holding the key down quickly

increases the displayed value to 5.00 seconds. Pressing the

Down arrow

key once

decreases the value by 0.25 seconds. Holding the key down quickly decreases the pop

time to 0.00 seconds.

3. Press the

Esc

key to discard changes, retaining the current pop time, the Analyzer

briefly displays the following confirmation and exits to the

Util

submenu:

No DATA Stored

4. Press the

Ent

key to save the modified pop time value. Before exiting to the

Util

submenu, the Analyzer briefly displays a confirmation that the new value for pop up

window delay has been saved:

Storing DATA