Fluke Biomedical Cufflink - Manual (Page 112)

Cufflink
Operators Manual
3-38
Example
Read the user envelope
Command rduserenv
Results The Analyzer takes data for the user envelope in RAM and sends it
out the RS232 port.
Returned Data 1:100. 2:100, 3:100, 4:105, 5:110 …. 298:150, 299:140, 300:130, *
READPRESS
Use this command to show a value (in 0.25 mmHg increments) on the controller's display
for the Analyzer pressure transducer. There are no parameters for this command.
Example
Read the pressure transducer value.
Command readpress
Results The Analyzer reads the pressure transducer value stored in EEROM.
Returned Data 123.25; varies for each Analyzer
RESET
Use this command to reset the Analyzer back to factory default values. This affects the
parameters listed below. There are no parameters for this command.
Parameter Default Value
Pulse ID number 3
Heart Rate 80 BPM
Pressure Curve ID number A120 80
Pressure Curve Vertical Gain 100%
Pressure Curve Horizontal Shift 0 mmHg
Example
Reset CuffLink to default values
Command Reset
Results The Analyzer resets to factory values.
Returned Data *