Zilog EZ80F916 User Manual
Page 97
UM014423-0607
Using the Integrated Development Environment
ZiLOG Developer Studio II
eZ80Acclaim!
®
User Manual
77
Uarts
In the Uarts area, select the check boxes for the UARTS that you are going to use.
Project Settings—Commands Page
The following figure shows the Commands page.
Figure 56. Commands Page of the Project Settings Dialog Box
Link Configuration
Use the Link Configuration drop-down list box to select the configuration that best fits
your target. The project settings are modified accordingly. ZDS II automatically generates
a linker command file using the project settings. You can choose to include your own
linker command file.
NOTE: ZDS II—eZ80Acclaim! allows you a great deal of flexibility over where physical
blocks of RAM and ROM (both internal and external) are located in the system.
However, any blocks of Flash memory that use different programming algorithms
must be separated by at least 0x40 bytes. If this is not done, you cannot flash the