Zilog EZ80F916 - Manual (Page 433)

UM014423-0607 Using the Command Processor
ZiLOG Developer Studio II
eZ80Acclaim! ® User Manual
413
3. In the Command field (in the Command Processor toolbar), type in the command
sequences in the following sections to use the Flash Loader:
–
“Displaying Flash Help” on page 413
– “Setting Up Flash Options” on page 413
– “Executing Flash Commands” on page 414
– “Examples” on page 414
Displaying Flash Help
Setting Up Flash Options
Flash Setup Displays the Flash setup in the Command Output window
Flash Help Displays the Flash command format in the Command Output window
Flash Options "<File Name>" File to be flashed
Flash Options FLASHBASE = "<address>" Start location for external Flash
memory
Flash Options NUMFLASH = <1-8> Number of stack Flash devices
Flash Options OFFSET = "<address>" Offset address in hex file
Flash Options NAUTO Do not automatically select
external Flash device
Flash Options AUTO Automatically select external
Flash device
Flash Options INTMEM Set to internal memory
Flash Options EXTMEM Set to external memory
Flash Options BOTHMEM Set to internal and external
memory
Flash Options MANUF="<manufacture name>" DEVICE="<Name of Device>" Set the Flash device
Flash Options NEBF
Do not erase before flash
Flash Options EBF Erase before flash
Flash Options NEIP Do not erase info page
Flash Options EIP Erase info page
Flash Options NISN Do not include serial number
Flash Options ISN Include a serial number
Flash Options NPBF Do not page-erase Flash memory;
use mass erase