Zilog EZ80F916 User Manual
Page 140
UM014423-0607
Using the Integrated Development Environment
ZiLOG Developer Studio II
eZ80Acclaim!
®
User Manual
120
3. Select the number of bytes to read from # Bytes drop-down list box.
4. Click Read Serial to check the serial number for the current device.
Calculate File Checksum
Use the following procedure to calculate the file checksum:
1. Select Calculate File Checksum from the Tools menu.
The Calculate Checksum dialog box is displayed.
Figure 79. Calculate Checksum Dialog Box
2. Click on the Browse button (
) to select the
.hex
file for which you want to
calculate the checksum.
The IDE adds the bytes in the files and displays the result in the checksum field.
Figure 80. Calculate Checksum Dialog Box
3. Click Close.
Firmware Upgrade
NOTE: This command is available only when a supporting debug tool is selected (“Debug
•
USB Smart Cable
<ZDS Installation Directory>
\bin\firmware\USBSmartCable\
USBSmartCable upgrade information.txt
•
Serial Smart Cable
<ZDS Installation Directory>
\bin\firmware\SerialSmartCable\
upgrade information.txt
•
Ethernet Smart Cable