Zilog EZ80F916 - Manual (Page 21)

UM014423-0607 Getting Started
ZiLOG Developer Studio II
eZ80Acclaim! ® User Manual
1
Getting Started
This chapter describes the tools that make up the eZ80Acclaim! developer’s environment
and provides a tutorial of the eZ80Acclaim! developer’s environment, so you can be work-
ing with our graphical user interface in a short time. The following topics are covered:
•
“Installing ZDS II” on page 1
•
“Developer’s Environment Tutorial” on page 1
•
“Using Non-Simulator Debug Tools” on page 14
INSTALLING ZDS II
Perform the following procedure to install the eZ80Acclaim! developer’s environment:
1. Insert the CD in your CD-ROM drive.
2. Follow the setup instructions on your screen.
The installer displays a default location for ZDS II. You can change the location if you
want to.
DEVELOPER’S ENVIRONMENT TUTORIAL
This tutorial shows you how to use the basic features of ZiLOG Developer Studio. To
begin this tutorial, you need a basic understanding of Microsoft Windows. Estimated time
for completing this exercise is 15 minutes.
In this tour, you do the following:
•
“Create a New Project” on page 2
•
“Add a File to the Project” on page 6
•
“Set Up the Project” on page 8
•
“Save the Project” on page 13
When you complete this tour, you have a
sample.lod
file that is used in debugging.
NOTE: Be sure to read “Using the Integrated Development Environment” on page 15 to
learn more about all the dialog boxes and their options discussed in this tour.
For the purpose of this tutorial, your eZ80Acclaim! developer’s environment directory
will be referred to as <ZDS Installation Directory>, which equates to the following:
<ZILOGINSTALL>\ZDSII_eZ80Acclaim!_< version> \
where