Zilog EZ80F916 - Manual (Page 122)

UM014423-0607 Using the Integrated Development Environment
ZiLOG Developer Studio II
eZ80Acclaim! ® User Manual
102
Debug Tool
Select the appropriate debug tool from the Current drop-down list box.
•
If you select EthernetSmartCable and click Setup in the Debug Tool area, the Setup
Ethernet Smart Cable Communication dialog box is displayed.
NOTE: If a Windows Security Alert is displayed with the following message: “Do you
want to keep blocking this program?”, click Unblock.
Figure 68. Setup Ethernet Smart Cable Communication Dialog Box
– Click Refresh to search the network and update the list of available Ethernet
Smart Cables. The number in the Broadcast Address field is the destination
address to which ZDS sends the scan message to determine which Ethernet Smart
Cables are accessible. The default value of
255.255.255.255
can be used if the
Ethernet Smart Cable is connected to your local network. Other values such as
192.168.1.255
or
192.168.1.50
can be used to direct or focus the search.
ZDS uses the default broadcast address if the Broadcast Address field is empty.
– Select an Ethernet Smart Cable from the list of available Ethernet Smart Cables by
checking the box next to the Smart Cable you want to use. Alternately, select the
Ethernet Smart Cable by entering a known Ethernet Smart Cable IP address in the
IP Address field.
– Type the port number in the TCP Port field.
– Select the Use Alternate ZDI Clock Frequency check box if you want to override
the default ZDI clock frequency. The alternate ZDI clock frequency should only
be used if a reliable connection cannot be established with the default ZDI clock