Features – Altera Arria V Avalon-MM User Manual
Page 3
Refer to the PCI Express High Performance Reference Design for more information about calculating
bandwidth for the hard IP implementation of PCI Express in many Altera FPGAs.
Related Information
•
•
•
Features
New features in the Quartus
®
II 14.1 software release:
• Reduced Quartus II compilation warnings by 50%.
The Arria V Hard IP for PCI Express with the Avalon-MM interface supports the following features:
• Complete protocol stack including the Transaction, Data Link, and Physical Layers implemented as
hard IP.
• Support for ×1, ×2, ×4, and ×8 configurations with Gen1 and Gen2 lane rates for Root Ports and
Endpoints.
• Dedicated 16 KByte receive buffer.
• Optional hard reset controller for Gen2.
• Optional support for Configuration via Protocol (CvP) using the PCIe link allowing the I/O and core
bitstreams to be stored separately.
• Qsys example designs demonstrating parameterization, design modules, and connectivity.
• Extended credit allocation settings to better optimize the RX buffer space based on application type.
• Optional end-to-end cyclic redundancy code (ECRC) generation and checking and advanced error
reporting (AER) for high reliability applications.
Easy to use:
• Flexible configuration.
• No license requirement.
• Example designs to get started.
Table 1-2: Feature Comparison for all Hard IP for PCI Express IP Cores
The table compares the features of the four Hard IP for PCI Express IP Cores.
Feature
Avalon‑ST Interface
Avalon‑MM Interface
Avalon‑MM DMA
IP Core License
Free
Free
Free
Native Endpoint
Supported
Supported
Supported
Legacy Endpoint
(1)
Supported
Not Supported
Not Supported
(1)
Not recommended for new designs.
1-2
Features
UG-01105_avmm
2014.12.15
Altera Corporation
Datasheet