Figure 2-3, Table 2-1 – Digilent 6003-410-000P-KIT User Manual
Page 22
22
XUP Virtex-II Pro Development System
UG069 (v1.0) March 8, 2005
Chapter 2: Using the System
R
illustrates the configuration data path.
Four status LEDs show the configuration state of the XUP Virtex-II Pro Development
System at all times. The user can see the configuration source, configuration version, and
tell when the configuration has completed from the status LEDs shown in
Figure 2-3:
Configuration Data Path
Micro Port
JTAG Port
USB2
Microcontroller
& CPLD
JTAG Port
PROM
JTAG
SMAP Port
USER
GOLDEN
SMAP Port
PLATFORM
FLASH
JTAG Port
FPGA
SystemACE
Controller
Test JTAG Port
Config JTAG Port
Micro Port
VERSION SELECT
CONFIG SOURCE
CF CONFIG SELECT
UG069_06_122704
CF Card/
MicroDrive
Table 2-1:
System Configuration Status LEDs
System Status
LED Status
D19 (Green)
PROM Config
D20 (Green)
CF Config
D14 (Amber)
GOLDEN Config
D4 (Red)
Done
SelectMAP USER LOADING
ON
OFF
OFF
OFF
SelectMAP USER COMPLETED
ON
OFF
OFF
ON
SelectMAP GOLDEN LOADING
ON
OFF
ON
OFF
SelectMAP GOLDEN
COMPLETED
ON
OFF
ON
ON
JTAG COMPACT FLASH
LOADING
OFF
ON
OFF
OFF
JTAG COMPACT FLASH
COMPLETED
OFF
ON
OFF
ON