Digilent 410-269P-KIT - Manual

1300 Henley Court
Pullman, WA 99163
509.334.6306
www.digilentinc.com
chipKIT Cmod™ Reference Manual
Revised November 6, 2013
This manual applies to REV E of the board.
DOC#: 502-269 Copyright Digilent, Inc. All rights reserved.
Other product and company names mentioned may be trademarks of their respective owners.
Page 1 of 11
Overview
The chipKIT Cmod is a chipKIT/MPIDE compatible board from Digilent. It combines a Microchip®
PIC32MX150F128D microcontroller with a convenient 600-mil, 40-pin DIP package and two Digilent Pmod
connectors. Digilent’s Cmod boards are ideally suited for breadboards or other prototype circuit designs where the
use of small surface mount packages is impractical.
The chipKIT Cmod takes advantage of the powerful PIC32MX150F128D microcontroller. This microcontroller
features a 32-bit MIPS processor core running at 40Mhz, 128K of flash memory, and 32K of SRAM data memory.
The chipKIT Cmod can be programmed using the Multi-Platform Integrated Development Environment, MPIDE, an
environment based on the open source Arduino IDE modified to support the PIC32 microcontroller. The board
provides everything needed to start developing embedded applications using the MPIDE.
The chipKIT Cmod is also fully compatible with the advanced Microchip MPLAB® IDE. To develop embedded
applications using MPLAB®, a separate device programmer/debugger, such as the Digilent chipKIT PGM or the
Microchip PICkit™3 is required.
Features Include:
The chipKIT Cmod.

Microchip® PIC32MX150F128D microcontroller
(40/50 Mhz 32-bit MIPS, 128K Flash, 32K SRAM)

Convenient 600-mil, 2x20-pin DIP package

5V – 12V recommended operating voltage

33 available I/O pins

Two user LEDs

PC connection uses a USB A to micro B cable (not
included)

13 analog inputs
 3.3V operating voltage

Two Pmod connectors for Digilent peripheral
module boards