AERCO Esteem Boiler with EZ-Set Controller - Manual (Page 78)

GF-135 Esteem 399 Low NOx Boiler
Chapter 10
OMM-0089_0A Installation, Operation & Maintenance Manual EZ-SET Controller
Table 10-3: Information Displayed Using Boiler Information Menu
Information Item Description
Boiler Status
Displays the current operating state of the Esteem. This is the
same as the status line on the home screen.
Heating Call
Displays if a central heating call is present.
DHW Call
Displays if a domestic hot water call is present
Boiler Firing Rate
Displays the current firing rate of the Esteem.
Flame Ionization Current
Displays the current flame ionization current from the igniter.
Boiler Setpoint
Displays the current setpoint of the Esteem.
Boiler Supply Temperature
Displays the current supply temperature of the Esteem.
Boiler Return Temperature
Displays the current return temperature of the Esteem.
Boiler Flue Temperature
Displays the current flue temperature of the Esteem.
Outdoor Temperature
Displays the current outdoor temperature.
DHW Storage Temperature
Displays the current DHW storage temperature when Indirect
Water Heater Sensor 69107 is installed.
External Modulation Signal
Displays the current external modulation signal being received
from an external controller.
CH Ignitions
Displays the number of central heating ignitions since the unit
was installed. This counter increases in increments of twenty.
CH Runtime
Displays the number of hours the Esteem has run for a central
heating call since the unit was installed.
DHW Ignitions
Displays the number of domestic hot water ignitions since the
unit was installed. This counter increases in increments of
twenty.
DHW Runtime
Displays the number of hours the Esteem has run for a
domestic hot water call since the unit was installed.
Page 78 of 188 AERCO International, Inc. • 100 Oritani Dr. • Blauvelt, NY 10913 OMM-0089_0A
MC1 06/19/14 Ph.: 800-526-0288