AERCO Esteem Boiler with EZ-Set Controller - Manual (Page 118)

GF-135 Esteem 399 Low NOx Boiler
Chapter 18
OMM-0089_0A Installation, Operation & Maintenance Manual Controller Operation
To enter the access code, follow the instructions below.
Entering the Installer Access Code
1. Press the round INSTALLER button (Figure 18-1) to invoke the ACCESS CODE menu
(Figure 18-3).
2. Enter the installer access code “054” by using the LEFT and RIGHT buttons to select a digit
and the UP and DOWN buttons to change the digit. Press the OK button to enter the access
code.
3. The INSTALLER Menu (Figure 18-4) will be displayed after successfully entering the access
code. The Home Screen (Figure 18-1) will be displayed if the access code is not entered
correctly.
Figure 18-3: Access Code Entry Menu
NOTE
Entering the installer access code allows the installer to make
adjustments for 30 minutes. After 30 minutes, the access code will
need to be entered again to make any additional adjustments.
18.2 USING THE INSTALLER MENU
After entering INSTALLER access code, the INSTALLER menu is displayed (Figure 18-4).
Figure 18-4: INSTALLER Menu
Page 118 of 188 AERCO International, Inc. • 100 Oritani Dr. • Blauvelt, NY 10913 OMM-0089_0A
MC1 06/19/14 Ph.: 800-526-0288