KEYENCE IV Series User Manual
Iv series, User’s manual, Field network)
Table of contents
Document Outline
- Introduction
- Safety Information for IV Series
- Important Instructions
- Precautions on Regulations and Standards
- Version of the IV Series
- Structure of This Manual
- Contents
- Chapter 1 Getting Started
- Chapter 2 EtherNet/IP
- Chapter 3 Cyclic communication
- Overview of the cyclic communication
- Cyclic communication setting method
- Data allocation in the cyclic communication
- Input Assembly (IV series → PLC)
- Input Assembly parameter details
- ■Input Assembly Address 0: Control result (response)
- ■Input Assembly Address 1: Control error result
- ■Input Assembly Address 2 to 3: Handshake control/status/error result
- ■Input Assembly Address 4 to 7: Status result
- ■Input Assembly Address 8 to 23: Error/status/status result information
- ■Input Assembly Address 24 to 51: Statistics information
- ■Input Assembly Address 52 to 71: Position correction information
- ■Input Assembly Address 72 to 391: Tool information
- Output Assembly (PLC → IV series)
- Output Assembly parameter details
- Error code list
- Warning code list
- Operating procedure of the cyclic communication
- Chapter 4 PROFINET
- Chapter 5 Data I/O communication
- Overview of the data I/O communication
- Data I/O communication setting method
- Data allocations in the data I/O communication
- Control Modules (PLC → IV series)
- Status Modules (IV series → PLC)
- Tool Result Modules (IV series→ PLC)
- Control Modules parameter details
- Status Modules parameter details
- ■Command Status Bits Address 0: Control result (response)
- ■Command Status Bits Address 1: Control error result
- ■Command Status Bits Address 2 to 3: Handshake control/status/error result
- ■Device Results Bits Address 0 to 3: Status result
- ■Device Status Words Address 0 to 15: Error/status/status result information
- ■Device Statistics Address 0 to 27 (Statistics information)
- Tool Result Modules parameter details
- Error code list
- Warning code list
- Operating procedure of the data I/O communication
- Appendices