KEYENCE IV Series - Manual (Page 14)

1-2 - IV Series User’s Manual (Field Network) -
System Configuration
Basic configurations of IV-Series
Connecting the host device and single sensor
In addition to the status result import,
the trigger control and switching
of the set program number can be
performed with the control output.
Setting support software
(IV-H1)
IV Series
Sensor
IV-500C
IV-500CA
IV-500M
IV-500MA
IV-150M
IV-150MA
IV-2000M
IV-2000MA
Power I/O cable
(2m/5m/10m)
(Optional)
Dome attachment
IV-D10
Polarizing filter attachment
OP-87436/OP-87437
Photoelectric/
proximity sensor etc.
Sends the signal to the
trigger input when the
target is detected.
Indicator light/buzzer
etc.
Alarm can be output
by the status output
function.
24 VDC power
Ethernet cable
(2m/5m/10m)
PLC or other host device
System Configuration
1
Getting Started