KEYENCE IV Series - Manual (Page 37)

3-15 - IV Series User’s Manual (Field Network) -
Data allocation in the cyclic communication
z „
Input Assembly Address 4 to 7: Status result
The Bits at Address 4 to 7 of the Input Assembly have the following functions:
Address Bit Item Content Data content
4
0 Overall judgment
Displays the overall status
result.
0 : NG 1 : OK
1 Position correction
Displays the position correction
result.
0 : NG 1 : OK
2 Logic 1 Displays the result of Logic 1. 0 : NG 1 : OK
3 Logic 2 Displays the result of Logic 2. 0 : NG 1 : OK
4 Logic 3 Displays the result of Logic 3. 0 : NG 1 : OK
5 Logic 4 Displays the result of Logic 4. 0 : NG 1 : OK
6 to 7 Reserved by system --- ---
5 0 to 7 Reserved by system --- ---
6
0 Tool 1 Displays the result of Tool 1. 0 : NG 1 : OK
1 Tool 2 Displays the result of Tool 2. 0 : NG 1 : OK
2 Tool 3 Displays the result of Tool 3. 0 : NG 1 : OK
3 Tool 4 Displays the result of Tool 4. 0 : NG 1 : OK
4 Tool 5 Displays the result of Tool 5. 0 : NG 1 : OK
5 Tool 6 Displays the result of Tool 6. 0 : NG 1 : OK
6 Tool 7 Displays the result of Tool 7. 0 : NG 1 : OK
7 Tool 8 Displays the result of Tool 8. 0 : NG 1 : OK
7
0 Tool 9 Displays the result of Tool 9. 0 : NG 1 : OK
1 Tool 10 Displays the result of Tool 10. 0 : NG 1 : OK
2 Tool 11 Displays the result of Tool 11. 0 : NG 1 : OK
3 Tool 12 Displays the result of Tool 12. 0 : NG 1 : OK
4 Tool 13 Displays the result of Tool 13. 0 : NG 1 : OK
5 Tool 14 Displays the result of Tool 14. 0 : NG 1 : OK
6 Tool 15 Displays the result of Tool 15. 0 : NG 1 : OK
7 Tool 16 Displays the result of Tool 16. 0 : NG 1 : OK
y If the position correction/logic/tool is not set, the data content will be “0”.
y If the status result of the tool is either “trigger standby” (no judgment) or “judgment not possible”, the
data content will be OFF (0).
3
Cyclic communication