Dell POWEREDGE M1000E - Manual (Page 44)

16 Web Tools Administrator’s Guide
53-1002756-01
Requirements for IPv6 support
1
The default path for Windows is C:\Documents and Settings\<>\Webtools\.
The default path for Linux is /root/WebTools/.
3. Click Capture to start collecting the SupportSave logs.
A zipped-up SupportSave folder is saved in the defined location. SupportSave zip file name
format is “WT-SS-switchIP-dd-mm-yy-hh-mm-ss.zip”. The SupportSave file name will show the
VF ID if VF is enabled on the switch.
NOTE
SupportSave collection is terminated if the time exceeds 20 minutes.
Requirements for IPv6 support
The following list provides requirements for Web Tools IPv6 support:
• In a pure IPv6 environment, you must configure your DNS maps to the IPv6 address of the
switch.
• The switch name is required to match the DNS name that is mapped to the IPv6 address.
• If both IPv4 and IPv6 addresses are configured, Web Tools can be launched using any
configured IP address.
• Use a switch with v5.3.0 or later firmware to manage a mixed fabric of IPv4 and IPv6 switches.
• Switches running on v5.2.0 do not discover IPv6 address-only switches in the same fabric until
the IPv4 address is configured.