Dell POWEREDGE M1000E - Manual (Page 106)

78 Web Tools Administrator’s Guide
53-1002756-01
Configuring port octet speed combination
5
FIGURE 16 ALPA Map selection
A dialog box launches listing the Port WWN to ALPA Map with the host. The Port WWN map
automatically populates.
FIGURE 17 ALPA Map dialog
9. Optional: Click Remove All to clear all of the Port WWN maps.
Configuring port octet speed combination
The Port Admin tab provides an option to set the Port Octet Speed Combination. This option is
available only on the following platforms:
• Brocade DCX 8510-8 and DCX 8510-4 with the FC8-32E, FC8-48E, FC16-32, and FC16-48 port
blades
• Brocade 6510
• Brocade 6520
The ports on these hardware models are segregated into 8 port octets. The Port Octet Speed
Combination is applied to the eight ports to which the selected port belongs. Based on this Port
Octet Speed combination, the speed options will be available in the Edit Configuration Dialog.
TABLE 10 Port octet speed combinations
Port Octet in Combination Available port speeds within the Octet
1 Auto or Fixed 16G|8G|4G|2G
2 ASN or Fixed 10G|8G|4G|2G
3 Auto or Fixed 16G|10G