Dell POWEREDGE M1000E - Manual (Page 202)

174 Web Tools Administrator’s Guide
53-1002756-01
Access control list policy configuration
15
Virtual Fabrics considerations
ACL policies can be implemented at the logical switch/logical fabric level.
Creating an SCC, DCC, or FCS policy
You can create the FCS policy only once.
To create an SCC, DCC, or FCS policy, perform the following steps.
1. Open the Switch Administration window as described in “Opening the Switch Administration
window” on page 31.
2. Select the Security Policies tab.
3. Select the ACL subtab.
4. Select a policy by clicking on the appropriate tab (SCC, DCC, or FCS).
5. Click Edit.
This launches the ACL Policy Configuration wizard.
6. Select the policy type you want to edit.
7. Click Next and click Create.
8. SCC Option: Add switches to an SCC policy by selecting one or more switches and clicking Add
or Add All.
9. SCC Option: To add an offline switch, click Add other Switch and enter the WWN.
10. DCC Option: Select the ports to add to a DCC policy.
When you launch the DCC Policy Configuration wizard, only the launched switch and its ports
are listed in the tree. All the devices in the fabric are also listed in the tree.
11. Click OK to confirm the changes to the switch.
12. Activate the policy in order to implement it. Refer to “Activating all SCC, DCC, or FCS policies”
on page 175 for instructions.
Editing an SCC, DCC, or FCS policy
To edit an SCC, DCC, or FCS policy, perform the following steps.
1. Open the Switch Administration window as described in “Opening the Switch Administration
window” on page 31.
2. Make sure the Show Advanced Mode option is selected.
3. Select the Security Policies tab.
4. Select a policy by clicking on the appropriate tab.
5. Click Edit.
This launches the ACL Policy Configuration wizard.
6. Select the policy type you want to edit.
7. Click Next and click Modify.