Dell POWEREDGE M1000E - Manual (Page 112)

84 Web Tools Administrator’s Guide
53-1002756-01
GigE port modes
5
GigE port modes
Web Tools allows you to set the GigE port mode for the FX8-24 DCX Extension Blades to 1G, 10G, or
dual modes.
To configure the GigE port mode, perform the following steps:
NOTE
You must install the FX8-24 DCX Extension Blade in a slot containing 10GE license to configure the
mode.
1. Select Port Admin > GigE Ports.
2. Select View > Advanced.
3. Select a slot from the GigE Ports Explorer panel.
The Mode drop-down button gets enabled.
4. Select one of the following modes from the Mode drop-down button.
- 1G - To enable ge0 through ge9 ports.
- 10G - To enable xge0 and xge1 ports.
- Dual - To enable ge0 through ge09 and xge0 ports.
5. Click Yes on the confirmation dialog box.