Adding graphs to an existing canvas, Printing graphs, Modifying graphs – Dell POWEREDGE M1000E User Manual
Page 129
Web Tools Administrator’s Guide
101
53-1002756-01
Adding graphs to an existing canvas
7
3. Select File > Save Current Canvas Configuration.
The Save Canvas Configuration dialog box displays.
4. Enter a name and description for the configuration and click Save Canvas. A message displays,
confirming that the configuration was successfully saved to the switch.
Adding graphs to an existing canvas
The following procedure assumes that a canvas is already created.
To create a new canvas, you must first create graphs, as described in
“Advanced performance monitoring graphs”
on page 97, and then
save those graphs to a canvas, as described in
To add a graph to an existing canvas, perform the following steps.
1. Select File > Display Canvas Configurations.
The Canvas Configuration List displays. The error message “No Canvas configuration to
display” displays if there are no saved canvas configurations.
2. Click a canvas in the list.
3. Click Edit.
The Edit Canvas dialog box displays.
4. Click Add.
A list of graphs displays.
5. Click a graph to add it to the canvas and click Save.
Printing graphs
You can print a single graph or all the graphs displayed on the selected canvas configuration. Only
one canvas configuration can be opened at a time.
To print a graph, perform the following steps.
1. Open the Performance Monitor window.
2. Create a basic or advanced Performance Monitor graph as described in
“Advanced performance monitoring graphs”
3. To print a single graph, right-click the graph and choose Print. To print all the graphs displayed
on the selected canvas configuration, select File > Print All Graphs.
4. In the print dialog box, click OK.
Modifying graphs
To modify an existing graph that is saved in a canvas, perform the following steps.